# Xorg configuration created by system-config-display

Section "ServerLayout"
	Identifier     "Multihead layout"
# removed "left of" info
	Screen      0  "Screen0" 0 0
	Screen      1  "Screen1" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
	Option	    "Xinerama" "off"
	Option	    "Clone" "off"
EndSection

Section "Files"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, a font server independent of the X server is
# used to render fonts.
	FontPath     "unix/:7100"
EndSection

Section "Module"
	Load  "dbe"
	Load  "extmod"
	Load  "fbdevhw"
	Load  "glx"
	Load  "record"
	Load  "freetype"
	Load  "type1"
EndSection

Section "InputDevice"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#	Option	"Xleds"		"1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
#	Option	"XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#	Option	"XkbModel"	"pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#	Option	"XkbModel"	"microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#	Option	"XkbLayout"	"de"
# or:
#	Option	"XkbLayout"	"de"
#	Option	"XkbVariant"	"nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#	Option	"XkbOptions"	"ctrl:swapcaps"
# Or if you just want both to be control, use:
#	Option	"XkbOptions"	"ctrl:nocaps"
#
	Identifier  "Keyboard0"
	Driver      "kbd"
# changed XkbModel to "macintosh"
	Option	    "XkbModel" "macintosh"
	Option	    "XkbLayout" "us"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "IMPS/2"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "yes"
EndSection

Section "Monitor"

 ### Comment all HorizSync and VertSync values to use DDC:
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "Apple Aluminum PowerBook G4"
	DisplaySize  320	220
 ### Comment all HorizSync and VertSync values to use DDC:
	HorizSync    30.0 - 100.0
	VertRefresh  50.0 - 60.0
	Option	    "dpms"
EndSection

Section "Monitor"

 ### Comment all HorizSync and VertSync values to use DDC:
	Identifier   "Monitor1"
	VendorName   "Monitor Vendor"
	ModelName    "HP L2335 Flat Panel Monitor"
 ### Comment all HorizSync and VertSync values to use DDC:
	HorizSync    30.0 - 107.0
	VertRefresh  48.0 - 85.0
	Option	    "dpms"
EndSection

Section "Device"
	Identifier  "Videocard0"
	Driver      "radeon"
	VendorName  "Videocard vendor"
	BoardName   "ATI Technologies Inc RV350 [Mobility Radeon 9600 M10]"
#	Option	    "UseFBDev" "true"
EndSection

Section "Device"
	Identifier  "Videocard1"
	Driver      "radeon"
	VendorName  "Videocard Vendor"
	BoardName   "ATI Technologies Inc RV350 [Mobility Radeon 9600 M10]"
	BusID       "PCI:0:16:0"
	Screen      1
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Videocard0"
	Monitor    "Monitor0"
	DefaultDepth     16
	SubSection "Display"
		Viewport   0 0
		Depth     16
		Modes    "1280x854"
	EndSubSection
EndSection

Section "Screen"
	Identifier "Screen1"
	Device     "Videocard0"
	Monitor    "Monitor1"
	DefaultDepth     16
	SubSection "Display"
		Viewport   0 0
		Depth     16
		Modes    "1920x1200"
	EndSubSection
EndSection

Section "DRI"
	Group        0
	Mode         0666
EndSection